COMPAS Go Release : September 02, 2020

• The Transformer configurator will resolve to a specific catalog number in the configuration view.  If the catalog number or material number exists in the COMPAS Product Catalog, then the material number appears on the quote line.  See lines 1000 & 1001 below.

• However, if that material does not exist in the COMPAS Product Catalog, then it will not ‘typematch’ so the material shown on the quote line is TYZ:17_Transformer.  See line 1100 below.

• • The  Technical Review Status = "Required" which must be resolved before Price Approval

• The rules have been changed to be sure the price for TYZ:17_Transformer = $0 even when Lug Kits or Wall Brackets are specified.  Before this change, the price of these options would appear in TYZ:17_Transformer, well under the correct total price for the transformer and options.

• Reminder: When TYZ:17_Transformer appears, this line will be rejected at technical review.  Replace with TYZ:Manual_Line for product family =Transformers.  This line can be added by a Siemens sales engineer.   They can request a quote and lead time for the requested transformer and then update the quote line for Manual Line.

• Panel Types: P2 and P3

• Breaker Types:

• • TMTU Type: 250A frame 3VA52

• • ETU Type: 150A frame 3VA61

• • ETU Type: 250A frame 3VA62

• P2 and P3 Main and Branches

• Main Mounting Method:

• • Horizontal Mounted and Vertical Mounted

• Branches Mounting Methods:

• • P2: Horizontal Single Mounted

• • P3: Horizontal Single Mounted and Horizontal Twin Mounted

• Placement: 3VA breakers are unit space mounted

• Breaker Qty:

• • P2: maximum (3) 3VA breakers

• • P3: maximum (6) 3VA breakers 

• 3VA breakers can be mixed with QR breakers in P2 and P3

Note: To view additional information on configuration, click here

• BSPD is now offered only in P1 panelboard

Select BSPD from Device list, add QTY, then hit Add Branch

• BSPD can be selected under branch device

• BSPD selection is based on system voltage

• BSPD is unit space mounted in P1 panelboard

• Maximum of 4 BSPD's can be selected in P1 panelboard

• BSPD takes up either 3 pole spaces in a 3 phase system or 2 pole spaces in a single phase system

• Selecting BSPD requires at least one BL or 3VA41 or xGB breaker or beaker provision 

• BSPD can also be offered in the P1 unassembled panelboard program

Note: To view additional information on BSPD, click here