|
|
|
How to lubricate the cradle for a WL breaker?
1. Pull the cradle rails out of the cradle.
2. Wipe the sliding surfaces with a clean cloth.
3. Apply a small amount of Klüber Isoflex Topas NB52 to the sliding surfaces of the rails as shown in the video.
4. Apply a small amount of grease to the sliding surfaces of the side walls as shown in the video.
This video is meant only to enhance, not replace, the operating instructions enclosed with every product. Please review all instructions carefully before viewing the video. Product instructions are subject to technical changes without prior notice.
This article was:
