Motor Control Centers may require a new device to fit into an existing space. Users can configure the MCC Unit in COMPAS Go
1. Make MCC Unit Only a favorite from Configurable Products.
2. Click the wrench to open the configurator. Notice the view is similar to the MCC configurator. Under MCC Unit go to General and select the MCC Type. (Set Designation if required)
3. Then select the Unit Type and Reference Number. Note Reference is not a required field but is provided for users to add the SO number of the existing MCC so the plant can look up and match the existing MCC specifications.
4. Confirm Voltage and Available Fault Current. These selections will effect the configuration selections.
5. Go to Branch. Click the wrench to configure
6. Unit Details: The information here show default settings. Users can change if required.
7. Load Details: Select NEMA Size or start with Horsepower to complete this step of configuration.
8. Options: Add options to the unit.
9. Example: Pilot Devices.
10. MCC Unit Only Line is complete.
11. Users can now click on Save and Close OR go to Layout. Layout provides Drawing Details and Drawing.
12. Drawing provides specification information of the unit. No outline drawings are available for MCC Unit Only. Users can download a DXF Drawing. (Similar to DWG as long as an auto-cad reader is installed. )
13. For Motor Control Center web site, click here
14. Request Form from SPEEDFAX page 16-24, click here