This article describes how to add a tenant circuit breaker to PowerMod meter stacks

1. On the product selector page, scroll down until you locate the "Multi-Family Metering" option. Click on "Multi-Family Metering" to open the drop-down menu. Then, select "PowerMod" from said drop-down menu. 

2. Once opened, complete the top section of the PowerMod configuration preferences . 

3. Next, click on the "Select Device" drop-down menu located in the bottom section of the configurator. Scroll down until you locate the "Residential Stack" section and select "Meter Stack" from this section. 

4. Fill out the necessary selections under the "Filter" heading (circled in red) in order to obtain a meter stack part number.
Note: Make sure this meter stack catalog number complies with the local utility requirements.

5. Once a compliant meter stack catalog number is selected, scroll down to the heading "Tenant Configuration 1".  Check the "Add Tenant Device:" box. A new menu will populate beneath the "Tenant Configuration 1" heading. 

6. Fill out each of the selections in bold blue font from this section to obtain the desired circuit breaker catalog number for the meter stack. Be sure to pay attention to the quantity. 

7. Once complete, select the "X" in the top right of the configuration screen to close and save the meter stack.