Busway Configurator / Sketcher - Navigation Tools


This article describes the Busway Sketcher toolbar options available for the user in COMPAS Go.

Mouse: The scroll wheel is one if not the most important added button that will be of a great help while using Busway Sketcher (Configurator). The following 2 basics movements will inform you of its benefits.

Scroll up and down : Scroll up to zoom out and scroll down to zoom in.

  1. Pan:  Hold left mouse button and move mouse to adjust / pan the layout.

             

  1. Zoom All: Use this command to view complete Busway Run.

  2. Zoom In: Use this command to zoom in Busway run.
  3. Zoom Out: Use this command to zoom out Busway run.
  4. Pan: Use this command to pan Busway run.
  5. ISO View: Use this view to set ISO view for the Busway run. e.g. Front, Top, ISO SW, ISO SE, ISO NE and ISO NW views.
  6. Rotate: Use this command to rotate Busway run model around axis at center.
  7. Actions: 
  8. Hide Dimensions: Use this command to show or hide dimensions on Busway run components.
  9. Segment Break: Use this command to break long straight segments into smaller length to accommodate Busway run in available space.
  10. Move Horizontal: Use this command to move part of Busway run to connect with another part.
  11. Move Vertical: Use this command to move part of Busway run to connect with another part.
  12. Measure: Measure distance between any two points, components.
  13. Merge: Merge two Busway straights.

Config: Lists all the components from Busway run. 

       

Undo: Undo previous one action.

Redo: Undo previous one action.

Delete: Delete selected Busway component.

Select: Select Busway component.



Article ID: 351
Last updated: 14 Mar, 2022
Revision: 7
Configuration -> Busway Configurator / Sketcher - Navigation Tools
https://sandy.compas.siemens-info.com/busway-configurator-sketcher-navigation-tools_351.html