Inside Sales PLT : Adding Components in Configurator - UPB


This article helps to user to create unassembled during configuration of Panelboard.

1. Login into COMPAS with valid credentials

2. Create a new quote or open an existing quote

    Create new quote -  

    Open existing quote - 

3. Make the quote as editing "ON" 

4. From the action menu, click on the "Add Product" 

5. Click on the "" for the "Panelboard" under the Panelboard section as shown below.

Note: Clicking on the "" can add it to the favorites.

6.  On clicking the , following configuration page opens for the user.

7. After configuration is complete, navigate to the layout tab. Click the actions menu and an option "Unassembled" is available. Click on the "Unassembled" option and will open up the unassembled components list.

 

8. Unassembled components listed below can be added to quote by clicking on "Add to Quote" button. 

# Component Description
1 US2:MLKA1A KIT 250A Main Lug Kit 1PH
2 EGK GND BUS KIT, AL. 42 CKT (100/Bx)
3 S32B FAS-LATCH FRONT ASSY 20W 32H, SURFACE
4 B32 20W TYPE 1 BOX W/O GROUND BUS, 32H X 20W
5 US2:P1A18MC250AT P1 REV. UPB 250A 120/240V 18CIR AL
6 B130 BREAKER 30A 1P 120V 10K BL



Article ID: 3980
Last updated: 26 Jul, 2021
Revision: 3
Learning_Track -> Inside Sales PLT : Adding Components in Configurator - UPB
https://sandy.compas.siemens-info.com/inside-sales-plt-adding-components-in-configurator-upb_3980.html