How do I input rear load barriers into switchboard section?


This article provides detailed information on rear load barriers (rear bus barriers) into switchboard section in COMPAS Go.

1. After completing the switchboard configuration, navigate to the manual layout as shown below.

2. Click on the section properties as shown below

3. Select the "Rear Bus barriers" as shown below.



Article ID: 4457
Last updated: 12 Oct, 2020
Revision: 4
Configuration -> How do I input rear load barriers into switchboard section?
https://sandy.compas.siemens-info.com/how-do-i-input-rear-load-barriers-into-switchboard-section_4457.html