Phase 1 of SEM3T Implementation

• Accurate pricing & Selection

• Drawing / report enhancement in phase 2

Digital Meter

• Correct issue with PAC3120/3220 wiring points

• Prevent PAC2200 on 480V systems

Distribution Individual Mount

• Allow 40”W 2-wide combo section

• Display connection type selection

Disconnect

• Default SEM3 on branches added below incoming when SEM3 selected @ SBD level

Drawings

• Correct issue with HD Combo showing hinged gutter covers when not selected

Enclosure

• Default to 4.125” overhang when non-EUSERC weatherproof

• Update shipping split logic when non-EUSERC weatherproof

Factory Options

• Correct price for 6GK52061BB102AA3

MG3

• Select group 2 adder when 6000A BPS

Pricing

• Update FD/DG/FG/xGB pricing

• Add new WL COM35-DAS only option

• Correct logic error on 2-wide combo section bus pricing

• Change top cable, outdoor conflict to warning message

MCCB/VL

• Require tech review when FG breaker

• Enable HD kit for 3VA41 breakers

WL

• Default to FS2/3 for tie breakers

• Add COM35-DAS only option and set as default when standard DAS is selected

• Enable HD kit for 3VA41 breakers

Technical

• KB Version: 01.01.50.01

• Price Version: 20200531

• Release Date: 12/7/2020

Pricing

• RTSCD price adjustment

• Service Entrance price decrease

Catalog Number in Configuration Screen

• Bug fixed from November release that showed Catalog Number as “Not Available” even after complete configuration

Proposal Format Updates

• Added units to values in configuration summary

• Added withstand rating to configuration summary

• “No Metering Selected” detail added to METER category when no metering is configured

New Lineup Level Options

• Remote Breaker Racking Device (applies to all configured breakers)

• Ground & Test Devices

Competitor Breaker

• Additional Eaton Breaker trip units available (520M & 1150)

• Revised required selections for Cradle Only installation

• ModBus Trip Unit Communication Default

Protective Relays

• Siemens SIPROTEC Relays

• Removed unused single function relays

WL Breaker

• Updated default selections to drive to standard accessory configuration

Controller & OIP

• “None” option available for OIP

Pricing

• New keys for all new options added (see above)

• Updated WL pricing

Trip Unit Type

• Thermal-Magnetic (TMTU) and Solid State (ETU)

Breaker Frames

• 400A and 600A

Breaker Types  

• 400A TM: 3VA53

• 400A SS:  3VA63

• 600A TM:  3VA54

• 600A SS:  3VA64

Poles 

• 3VA53: 2-Pole in 3-Pole Frame, 3-Pole Frame

• 3VA54:  2-Pole in 3-Pole Frame, 3-Pole Frame

• 3VA63: 3-Pole Frame

• 3VA64: 3-Pole Frame

Trips

• 3VA53: 200, 225, 250, 300, 350, 400

• 3VA54: 450, 500, 600

Sensors

• 3VA63: 250, 400

• 3VA64: 400, 600

Main Breaker Mounting Method

• Vertical Mounted Main in both P2 and P3 for all 400A and 600A 3VA breakers (TM and SS)

COMPAS UI to configure 400A 3VA53 / 3VA63 and 600A 3VA54 / 3VA64 main

Reference 3VA4 and 3VA5 Breakers Trip Unit Information

3VA6 Breakers ETU Trip Unit Information

• Power Panels (P4 and P5) base prices updates

• Breakers price updates for 3VA41, xGB, DG, FG, FD

• Unassembled Panelboard 400A JD Main Breaker Kit update

JD main breaker kit provided when JXD2/JXD6 breaker is selected

• • US2:MBKJD32400A

• • US2:MBKJD32300A

• • US2:MBKJD3300A

• • US2:MBKJD3400A

New Skinny WSPD Enclosure

New Selections

• Style

• • Skinny for new Skinny design – Enclosure rated 65kA

• • Standard for Legacy design

• Disconnect Install Type

• • Skinny

• • • None if Internal SPD field installed

• • • Field Installed if external SPD field installed

• • Standard

• • • None for No Disconnect

• • • Factory Installed for HEG breaker Disconnect

• SPD Install Type

• • Skinny – Field Installed

• • Standard – Factory Installed

• SPD Type and Mounting

• • Skinny

• Type 1 - Internal Mount – Boltshield QSPD type SPD

• Type 1 - External Mount – TPS3 03, TPS3 09 type SPD

• Type 2 - External Mount – FirstSurge FS type SPD

Standard

• Type 1 – Internal Mount – Factory Installed TPS3