Following are the list of fixes in Panelboard configuration in COMPAS Go. These fixes are released to production in May 2021.

Fixes are on the following categories 

• P3 Panelboard
• P4 & P5 Panelboard
• Sentron FD Type Breaker
• Conflict UI

Panelboard P3 Fixes:

1. 400A and 600A breaker lug information is visible on 3VA breaker configuration UI when 3VA main and subfeed breaker is horizontal mounted in P3.

2. Conflict is removed for P3 panels when 400A / 600A horizontal mounted 3VA main and sub-feed breaker is selected.

3. P3 MLO placement / Layout issue with 30” (and 24”) wide section corrections done as shown below.

4. P3 panelboard has option with 30” wide section updates. Layout invalid rules for unit space entries are removed or limited for 400A, 800A MLO cases.

5. P3 200% neutral option and feed thru lugs are updated to have option to removed conflicts .

6. P3 panelboard for 200% neutral option and 400A / 600A 3VA sub-feed breaker are updated to removed conflicts.

Panelboard P4 and P5 Fixes:

1. P5 3VA41 type breakers HD kit placement issue is removed. [Reported from P user, and below is the correction of HD kit in power panel.]

2. 400A and 600A breaker lug information is visible on 3VA breaker configuration UI when 3VA main and branch breaker is horizontal mounted in P4 / P5. Similar like above screen shot of 400A/600A lug info on UI for power panels

3. Conflict in Breaker is removed when 400A / 600A horizontal mounted selection for  3VA main and branch breaker.

Sentron FD Type Breaker Fixes:

1. Sentron FD type breaker will result a conflict in P2 / P3 / P4 / P5.

2. Sentron FD type breaker conflict can be removed by reset Breaker Flag on conflict resolution screen.

3. Sentron FD type breaker will trig Tech. Review

Conflict UI Fixes:

1. Option to resolve the conflict by unchecking the option is made available now.