How to add ATS in Switchboard?


We can have only open type ATS installed in switchboard section.

1. Under the incoming/breaker you can add the ATS

2. You need to add the information below. Also, you can select the bus or cable connection.

3. The size of the switchboard section will be based on the ATS manufacture drawing. 



Article ID: 990
Last updated: 22 Oct, 2020
Revision: 5
Configuration -> How to add ATS in Switchboard?
https://sandy.compas.siemens-info.com/how-to-add-ats-in-switchboard_990.html