GM Bus Plug Suffix
These are plugs for General Motors. Their specification calls for Class R fuse rejector, enclosures without KO"s, and factory supplies compression lugs for phase and...
Comments: 0
XLU to Sentron Transition
A transition section is available from XLU to Sentron bus duct, independent of the duct style (feeder, plug-in).
Comments: 0
UL Compliance
A UL certificate of compliance covers all products listed under the description. The UL Listed seal means that the product has been tested by UL to nationally...
Comments: 0
Sentron Busway Spring Hanger Weights
Busway Spring Hanger Weight sxsh4 25 lbs. sxsh6 30 lbs. sxsh8 34 lbs. sxsh10 42 lbs. ...
Comments: 0
Can 60 HZ transformers be operated at 50 Hz?
Transformers rated at 60 Hz, should not be used on 50 Hz service due to higher losses and resultant heat rise. Special designs are required for this service.
Comments: 0
Sentron Busway Temperature Rise
Sentron busway is rated for 55°C rise over a 40°C ambient temperature. So 95°C-40°C or 131°F-104°F.
Comments: 0
Where is Busway Seismic Test Location?
Wye Labs (Gateway of Pacific - busway seismic cert)
Comments: 0
Class 82 Slim Line Pump Panel
Siemens Class 82 Pump Panel. Pump controllers monitor flow and/or level variables and control a pump accordingly to maintain the desired levels. Pump control can...
Comments: 0
FirstSurge Total Home Surge Protection | Volt Stream Video Series
In today's electronic world, electrical systems for the home or business just aren’t complete unless they incorporate surge protection. This is best accomplished by...
Comments: 0
Difference between Type I and Type II SPD
An overview of the differences of Type I and Type II Surge Protection Per the National Electrical Code® (NEC) and ANSI/UL 1449, SPDs are designated as follows: Type...
Comments: 0