|
|
|
The Joint Mounted Tap Box Flexible Connector is constructed with an “off the shelf” straight wire way nipple. The bolt pattern at either end of the Nipple Accessory matches the bolt pattern of commercially available UL listed metallic wire way allowing the addition of commercial wire way fittings such as elbows, short straight sections as suitable for the installation.
- TBNK4 - 4" Flexible Connector
- Connecting Joint Mounted Tap Box to P1 and P2 Panels
- Opening for cable pass through to downstream equipment
- Connecting Joint Mounted Tap Box to P1 and P2 Panels
- TBNK6
- Connecting Joint Mounted Tap Box to P3 and P4 Panels
- Opening for cable pass through to downstream equipment
- Connecting Joint Mounted Tap Box to P3 and P4 Panels
- TBNK8
- Connecting Joint Mounted Tap Box to P5 Panels
- Opening for cable pass through to downstream equipment
- Connecting Joint Mounted Tap Box to P5 Panels
This article was:
