Switchboard Insulated Bus


When insulated bus is selected on a switchboard, electrical grade tape is applied to the bussing where possible. This excludes vertical bus in a distribution section and all joints & bolted connections

The specification of the tape is as follows:

Material:  Polyvinyl Chloride Insulating Tape

Thickness: 0.10 (Ten Thousandths) minimum

Temperature rating 105°C

To configure in COMPAS Go, select the “Bussing” tab under the top level “Switchboard.” 



Article ID: 1073
Last updated: 25 Sep, 2020
Revision: 4
Configuration -> Switchboard Insulated Bus
https://sandy.compas.siemens-info.com/switchboard-insulated-bus_1073.html