|
|
|
.gif)
This article provides detailed information on the new enhancement in the manual layout in COMPAS Go. User can now place the devices in the workbench during configuration as enhancement option in manual layout. Following configurations are enabled with the new changes. Click on the below icon to view the steps for the respective products.
|
|
|
|
|
|
MCC |
Switchboard |
LVS |
Panelboard |
.
.png)
.png){kind=small}
1. Launch the MCC configuration.
2. On doing so, the following is available to the user to configure.
.png)
3. After configuring the incoming, branches and options, now the user has option on the configured device to have them placed in the workbench by clicking on the icon .png){kind=small}
.png)
Options available to the user for the instance
|
Action |
Description |
|
|
|
View configuration in “Read only” mode |
|
|
|
Delete layout for the instance |
|
|
|
Split the instance |
|
|
|
Place the devices in workbench |
|
|
|
Configure the instance |
|
|
|
Duplicate the instance |
|
|
|
Delete the instance |
|
|
|
Check the price of the instance |
4. Now navigate to the manual layout tab in the "Layout/Design" as shown below.
.png)
5. Now the user can place the device as per the requirement in the layout.
6. If the user is reconfiguring a configuration, it is required to perform the action, "Delete Layout Instance" using the icon or use delete layout from the action menu.
.
.png)
1. Launch the switchboard configuration.
2. On doing so, the user has the following page to configure switchboard
.png)
3. After configuring the incoming, main, branch and options, now the user has option on the configured device to have them placed in the workbench by clicking on the icon
.png)
4. Now navigate to the Layout/Design and select the manual layout tab as shown below. The devices that were selected to be in workbench are available in the workbench.
.png)
5. Now the user can perform manual movement of devices based on requirements by drag and drop or by
6. If reconfiguration is initiated for an existing configuration, user has to perform "Delete layout Instance" as shown below or select the delete layout from the action menu.
.png)
.
.png)
1. Launch the LVS configuration by selecting the .png){kind=small}
2. On doing so, the configuration is open for the user.
.png)
3. After configuring, now the user has option on the configured device to have them placed in the workbench by clicking on the icon
.png)
5. Now navigate to the manual layout page
.png)
6. If the configuration is opened for reconfiguration, delete layout should be performed before using the new option.
.
.png)
We know you need this option. We are working on this. Panelboard will have this option soon.