• Breaker MCCB 

• EV Charger 

• LH Contactor  

• MCC 

• PowerMod 

• Panelboard 

• Russelectric  

• Safety Switch 

• SieBreak 

• Soft Starter 

• Transformer  

1. 3VA53/63 400 Amp Breakers and 3VA54/64 600 Amp Frame, 400 Amp max Trip Amps:

• Corrections made to allow for the following lug kits with and without Voltage Tap

• • Aluminum Body Mechanical Lug – 3VA9373-0JJ24 (no Voltage Tap)

• • Select Wire Range ‘250-750 KCMIL CU/AL’ or (2) cables per phase ‘250 KCMIL CU/AL’

• • Aluminum Body Mechanical Lug – 3VA9373-0JC24 (with Voltage Tap)

• • Select Wire Range ‘250-750 KCMIL CU/AL with Tap’ or (2) cables per phase ‘250 KCMIL CU/AL with Tap’

2. Sensitrip Electronic Trip Circuit Breakers SJD/SLD/SMD/SND/SPD

• These breakers will be obsolete later this year. They are being removed from the COMPAS configurator now.  

• Replace with the equivalent 3VA6 frames.

• • 3VA6 are available with options for 100% Rated Frames.

• • 3VA6 have a variety of lug/wire connector options plus internal accessories and enclosures.

• • SJD/SHJD/SCJD -400 Amp Frame – Use 3VA63

• • SLD/SHLD/SCLD -600 Amp Frame – Use 3VA64

• • SMD/SHMD/SCMD -800 Amp Frame – Use 3VA65

• • SND/SHND/SCND -1200 Amp Frame – Use 3VA66 (1000 Amp max.) or 3VA67 (1200 Amp max.)

• • SPD/SHPD -1600 Amp Frame – Use 3VA68 (select Front or Rear Connected Mounting Base)

Technical Info

• KB Version: 00.00.07.03 

• Price Version: 20240101

• Release Date: 06/2023

• New configurator for the SICHARGE UC Heavy-duty electric vehicle chargers

• SICHARGE UC offers 150 kW of flexible charging solutions for buses, trucks and heavy-duty vehicles.

• Compatible with the Combined Charging System (CCS) type 1 charging standard 480/277V & 208/120V, 65kA

• Sequential charging for up to four dispensers

• LED status lighting for easy notifications

• Manufactured in the US

Technical Info

• KB Version: 00.00.01.01 

• Release Date: 06/2023

1. LEN - Electrically Held, No Disconnect

• No change in offering.   We edited rules for LEN for which plant will build some products.

• NEMA Type 1, 3R/4/12 and 4/4X Stainless Steel for Contactor Amp Rating 20 & 30 Amp 6-12 pole.

• Sales order child lines may appear as TYZ:ContactorLE or TYZ:ContactorLEV

2.  CLM - Mechanically Held, No Disconnect

• No change in offering.  We edited rules for CLM for which plant will build some products.

• Open Contactors – all ratings 

• NEMA Type 1 30- 200 Amp Rating – all poles

• NEMA 3R/4/12 and 4/4X Stainless Steel - 30 – 100 Amp Rating

• Sales order child lines may appear as TYZ:ContactorCLM or TYZ:ContactorCLMV

• Changes will appear in COMPAS, SAP and iMall quotes/orders.

Technical Info

• KB Version: 00.00.09.37 

• Price Version: 20240101

• Release Date: 06/2024

• For Control Wire Marker Type removed value None and added value Special Sleeve. Defaulted to Sleeve and changed Sleeve price to 0. Made Special Sleeve price same as current Sleeve price. For Component Nameplate removed value None. Defaulted to Label – adhesive and changed Label - adhesive price to 0.

• Added AE required technical review flag for obsolete Sentron Sensitrip circuit breakers.

• Added Tie breaker pricing for breaker and transition bus price.

• Added Common Factory Option Ground Stud On Door.

• Added pricing for 3WA 2500A rating class S breaker.

• 3WA pricing description now shows additional description for 3WA Local Electric Close and Lock Brkr Off-Front Panel Mnt.

• For MCC unit only wiring class Is (Custom Unit Diagrams Only), II (Std Unit/Interwiring Diag), IIs(Cust Unit/Interwiring Dia) are now allowed.

• For MCC unit only wiring type C (Top Master ctrl/power tb), C (Bottom Master ctrl/power tb) are now allowed.

• 600A LD FCB no longer has red conflict.

• Changed characteristics Vertical Bus Start Y, Vertical Bus End Y to always be visible.

• Added characteristics Bus Duct Type, No Horizontal Bus, Incoming Location, Splice To Existing Type, Existing MCC Type, Cables Per Phase, Cable Size, Existing Horizontal Bus Temp, Subfeed Usage, Existing Order Number to drawing details Layout tab for COMPAS OE config xml.

• Changed characteristic number for Incoming Location, Cables Per Phase, Cable Size for MDS unit so that it matches other units.

Technical Info

• KB Version: 00.00.62.01

• Price Version: 20221001

• Release Date: 6/2024

PowerMod update Defaults for DAS - See below: (ref. BTKB-824) (BTPROG-2308)

• Change default for all Breaker types of devices with DAS option.  If 1200A or higher MB – set default to Maintenance Mode = “TRUE”.

• this will reduce errors where this check box is not set properly.

• Note: If Catalog number without DAS is selected for 1200A or higher – this will result in a conflict.  The Maintenance mode checkbox will have to be unchecked to resolve the conflict or select a DAS mode device 1200A or higher.

Phase-Out of all TPS3/ASCO/First Surge products 

• This is for information only.  No specific action has been taken during this release.

• This is in progress and in the near future some red lining of quotes that include Surge products being phased out will be seen. Details of this activity will be published in other locations.

• This is to make users aware that the transition to TPS4/Raycap Products is not yet complete.

COMPAS Maintenance items:

• Resi Stacks – remove default for Horn By-Pass (BTKB-845)

• Conflict removed; all Surge Devices are now allowed to be at the end of a lineup.

• Rules for line-ups with either spacer, elbow or Surge module at end have been changed from a conflict to simply an error message/note for only spacer and elbow.

Center-Fed Main and Tap Box Conflict Discussion

• For each Lineup, a Center-fed module Note/message will be visible, reminding users of the Max. Cross bus limit.

• Note: “Center Fed Main Modules and Tap Boxes that allow over 1200 Amps Line Side Current must be reviewed.  It is Engineer/Customer responsibility to configure and ensure the 1200A max Cross bus limit is not exceeded on either side the main or tap box.”

• Typically, at least one “load type” of device must be on either side of the center-fed device to ensure that the 1200A max. cross bus is not exceeded, but in cases where there is Feed-thru capability, this rule is not necessarily valid.

• At this time the conflict is still in place, but we are looking into a better solution in the near future.

Technical Info

• KB Version: 00.00.34.01

• Price Version: 20220701

• Release Date: 06/2024

• Allow 3P GFCI breakers in 20” W enclosures

• Allow 3VA57,67 in 240/120 3Ø 4W Delta BØ H L AC

• Allow users to select 15, 20, 30A BLEB, BLFB, BLEHB & BLHFB GFCI breakers

• Series rating updates

Technical Info

• KB Version: 01.01.66.01

• Price Version: 20190617

• Release Date: 06/2024

Russelectric ATS

• Hide Web Server Option

• Hide MODBUS options

• Fix bug that auto-selects Power metering if Ethernet had been selected in past

• Allow for Ethernet to be visible of orders/quotes where it was previously selected

• Added selections for Ethernet, Serial, or Ethernet & Serial Connections for RPTCS

Russelectric LV/MV/CNTRL SWG

• Added Labor Summary Tab to configurator

Technical Info

• KB Version: 00.00.29.01 / 00.00.23.01

• Price Version: 20190617

• Release Date: 06/2024

ECS – Elevator Control Switch:

• Reduced catalog offering update. 1080 non-active catalog numbers removed.

Technical Info

• KB Version: 

• Price Version: 20240101

• Release Date: 05/2024

• Added cost for phase labels

• Drawing corrections

• Corrected incorrect width dimension for 36” cable pull section

• Corrected missing primary cable cutout for cable pull sections

• Updated BOM description to be symmetric for all LIS and VCB items

• Interlocked LIS & VCB ratings in LIS-VCB KB

• Interlocked fuses to momentary rating

• For 8kA, only current limiting type fuses can be selected

Technical Info

• KB  Version = 00.00.08.01

• Price Version = 20221001

• Release Date: 06/2024

3RE47 Soft Starter

• Oversized Enclosure Note- Notification of required oversized enclosure when K03, K04, S02 are configured. (info only note)

• Performance Level Feature- List of Performance Level features of the Basic, General, and High-Performance starter. (info only note)

Technical Info

• KBVersion -

• Price Version -

• Release Date: 06/2024

• Harmonic Mitigating Catalog # issue  (BTKB-755)

• Fixed Harmonic Mitigating Cat # determination:  ‘Copper’ and ‘Temp Rise’ values in wrong order.

• Update/Correct Wall Hanging Brackets for 1-phase Series J and Series H (BTKB-830)

• Functionality fixed so that proper Kit number gets added to Quote when needed.

Technical Info

• KB Version: 00.00.06.38 

• Price Version: 20240101

• Release Date: 05/2024