How to use Manual Placement

Article describing how to perform manual placement/ rearrangement of configuration layout for Switchboard, MCC, etc.

Step-by-step guide

  1. Configure a product e.g. MCC (Motor Control Center) and navigate to Layout Design => Manual Layout as shown in picture below.
  2. To move unit to Workbenk select  as shown in picture below
  3. Drag and drop desired unit / device to available space in layout as shown in picture below.
  4. You can move (drag and drop) units / devices within layout itself (no need to move it to workbench and back in desired position).



Article ID: 592
Last updated: 29 Aug, 2019
Revision: 4
Configuration -> How to use Manual Placement
https://sandy.compas.siemens-info.com/how-to-use-manual-placement_592.html