Transformer Impedance Specification
COMPAS only has max impedance options but there are minimum and nominal options also. The standard catalog number could meet the impedance spec without this option.
Comments: 0
Transformer Tap Option Configurations
The standard tap option is two 2.5% FCAN and four 2.5% FCBN (so it exceeds two 5% FCBN).
Comments: 0
Replacing original P1, RP1 or P2 panels with new panels in same enclosure.
In general all Original P1, Revised P1 and P2 panels that fit the standard 5.75" deep x 20" wide enclosures are interchangeable within the same height of enclosure and...
Comments: 0
Why I can not do CAN ahead on panel line in my job?
CAN ahead function is determined by Panelboard product rules or configurations specifications. Most of times, CAN ahead option is available when the panel is a...
Comments: 0
What locking provisions are available for the WL Power Circuit Breaker?
The WL family of Power Circuit Breakers, Listed to UL489 or UL1066, offers a wide range of standard and optional locking provisions. Please reference the WL Locking...
Comments: 0
What are the derating guidelines for low voltage switchgear installed in high ambient temperature environments?
For environments where the ambient temperature exceeds 40 degrees Celsius, the maximum continuous current rating of breakers, bussing and other current carrying...
Comments: 0
Can the Sentron circuit breaker type bus plug be mounted on both horizontal and riser runs?
Sentron circuit breaker bus plugs can be accommodating for both horizontal and vertical applications. The handle mechanism will be manufactured to provide up and down...
Comments: 0
Sentron Busway - Joint Mounted Tap Box Flexible Connector
The Joint Mounted Tap Box Flexible Connector is constructed with an “off the shelf” straight wire way nipple. The bolt pattern at either end of the Nipple Accessory...
Comments: 0
Sentron Busway Expansion Section
Details on Sentron Busway Expansion Section. Laminar serpentine copper plates grouped in sets are bolted between solid copper flange end bars Quantity of serpentine...
Comments: 0
Standard Salt Spray rating for Powerpanel and Switchboards
The standard Salt Spray rating is 600 hours. The standard paint color is ANSI 61 Gray.
Comments: 0