How to install padlocks on a WL breaker?
How to install padlocks on a WL breaker? 1. Slide locking bracket into position. 2. Latch plate of locking bracket in control gate. 3. Tighten the screws on the...
Comments: 0
How to install rated current coding for a WL breaker?
How to install rated current coding for a WL breaker? The rated current is coded at the factory, i.e. each and every circuit breaker can only be inserted into a cradle...
Comments: 0
How to install safety locks for a WL breaker?
How to install safety locks for a WL breaker? 1. Fit the driver disc into the control gate. 2. Insert the nut to the left of the driver disc. 3. Attach lock to...
Comments: 0
How to install the BSS for a WL breaker?
How to install the BSS for a WL breaker? 1. Remove the trip unit from the breaker, disconnecting all the wiring from the secondary disconnect blocks. 2. Remove the...
Comments: 0
How to install the current sensor for a WL breaker?
How to install the current sensor for a WL breaker? 1. Insert CT. 2. Establish plug-in connection. 3. Insert cover of cable duct and secure it. 4. Screw CT...
Comments: 0
How to install the mechanism operated contacts (MOC) clutch for a WL breaker?
How to install the mechanism operated contacts (MOC) clutch for a WL breaker? 1. Snap the clutch into place, through the opening in the right side of the breaker. ...
Comments: 0
How to remove the front panel for a WL breaker?
How to remove the front panel for a WL breaker? 1. Make sure the contacts are open and the spring is discharged. 2. Remove the screws that keep the front panel in...
Comments: 0
How to remove the finger cluster for a WL breaker?
How to remove the finger cluster for a WL breaker? 1. The finger clusters are held in place with 4 shoulder screws with Pozidriv heads. 2. Remove the lower screws...
Comments: 0
How to remove the current sensor for a WL breaker?
How to remove the current sensor for a WL breaker? 1. Remove cover of cable duct. 2. Detach connector. 3. Unscrew the screws keeping the CT cover in place. 4....
Comments: 0
How to remove a ground fault module from a WL breaker?
How to remove a ground fault module from a WL breaker? 1. The latches holding the ground fault module (GFM) are protected by to tabe which are broken out before the...
Comments: 0