How to add Gutter Device like Toggle Switch, Pilot Light, Push Button in Panelboard?
This article helps user with information to add gutter devices to panelboard configuration. 1. Launch a new configuration of panelboard or reconfigure an existing...
Views: 11323
Comments: 0
How to add Special or Custom Locks to Panelboard?
This article helps user to select the locks in the panelboard configuration. 1. Launch panelboard configuration or reconfigure an existing configuration. On doing so,...
Views: 11349
Comments: 0
How to configure a B Phase High Leg or C Phase High Leg panels?
This article helps to configure B Phase High Leg or C Phase High Leg panels. For B Phase High Leg: Select System Voltage = 240/120 3Ø 4W DELTA BØ H L AC For C...
Views: 10944
Comments: 0
How to add 750MCM MLO for P2, P3
MLO with 750MCM needs to have additional 6" of end Gutter Space for proper wire bending space 1. Select the 750MCM lugs 2. Select 6" additional end gutter...
Views: 11290
Comments: 0
How to add ATS in Switchboard?
We can have only open type ATS installed in switchboard section. 1. Under the incoming/breaker you can add the ATS 2. You need to add the information below....
Views: 11425
Comments: 0
How to quickly add complex product to a line item grid and configure?
User should be able to add products directly in the line item grid by entering the catalog number and desired quantity. 1. Create a project or open the quote. 2....
Views: 11342
Comments: 0
How to configure a backfed main in a panelboard?
This article describes to configure a backfed main in Panelboard. 1. Configure a P1 Panelboard with 100A & 125A Main Breakers. Note: Back-fed main options...
Views: 11376
Comments: 0
How to invert or flip breaker lug feeding location in COMPAS Go in Panelboard configurator?
This article provides option to invert or flip breaker lug feeding location in COMPAS Go. 1.First configure the breaker by complete breaker poles, breaker trip amp and...
Views: 11317
Comments: 0
Getting Error after configuring a Power Mod: Config instance configuration is not completed/conflicted. Do you want to add the configuration?
This happens when a required field has no entry. Required fields are the fields that labeled with blue lettering and have a blue asterisk behind it:
Views: 11276
Comments: 0
How to get the SPD catalog number on a Switchgear configuration
Go to your aux compartment that you checked SPD under the Surge Limitation tab. Select the SPD tab and find the catalog number field
Views: 11418
Comments: 0