How to configure Pump Controller?
How to configure pump panel? Step-by-step guide Configuration flow for all NEMA control product is from left to right and top to bottom. There are two sections under NEMA configurators, a) Base -...
Views: 11319
Comments: 0
How to configure Soft Starters Enclosed?
How to configure enclosed RVSS (3RW enclosed)? Step-by-step guide Configuration flow for all NEMA control product is from left to right and top to bottom. There are two sections under NEMA...
Views: 11337
Comments: 0
View configuration in full screen mode
This article provides information to view the layout in full screen. 1. Open Switchboard or MCC Configuration 2. Navigate to LAYOUT / DESIGN and select full...
Views: 11298
Comments: 0
How to change or adjust the breaker counts in Panelboards?
1. Reopen the completed configuration. 2. Try to reduce the breaker counts. 3. Delete the layout and adjust the breaker quantity.(Eg:From quantity 8 to...
Views: 11336
Comments: 0
How to configure a Unassembled Power Panelboard (UPP)?
This articles describes the configuration of UPP in COMPAS Go. Your browser doesn"t support video. Please download the file: video/mp4
Views: 11082
Comments: 0
How do I add panelboard sections?
Panelboard can have more than one section during configuration. The configurator provides option to add additional sections when required. Here are the steps to...
Views: 11657
Comments: 0
How do I Configure Residential Power Mod?
Power Mod provides Utility Metering for the Residential market. COMPAS Go can configure a Power Mod line up and provide accurate drawings. Step-by-step guide I will configure a Main breaker with...
Views: 11618
Comments: 0
How to change panelboard type?
Siemens has different family of panel boards which is high level of engineering innovation. They are broadly classified as Lighting panels and Power panels. In...
Views: 11592
Comments: 0
How to update layout?
Layout is a 2D placement representation of the devices that is configured. After placement, if the configuration is changed, the representation needs to be re-drawn,...
Views: 11378
Comments: 0
How to find 10 Mode in Configuration
For SPD configuration, this article provided information on the TPS Mode and to get the "10 Mode" characteristic value. Step-by-step guide In the check-out quote, configure the SPD in the...
Views: 11357
Comments: 0